brother-dcp-1612w 2021-08-06T04:24:44+00:00
  • Home »
  • Brother DCP 1612W Printer

INSTRUCTIONS FOR Brother DCP J1612W SETUP

The Brother Dcp J1612W Setup comes with an improvised design that fits anywhere. On that note, it is easy to set up and has convenient paper handling, which holds up to 150 sheets of paper. Do you want to learn about the printer setup? Do check this page for more detailed information.

Brother DCP 1612W setup

Unboxing & Basic Setup

Unboxing:

  •   At first, open the product box and check all the components present in it.
  •   Take out the printer from the box. Keep it aside. Later, clear the box by removing all the other packaging materials.
  •   Remove all the protective tapes from the inside and outside of your printer.
  •   Now, it’s time to install the toner cartridges.

Installation Of The Toner Cartridges:

  •   Open the top cover of your Brother printer.
  •   Unpack the toner cartridge.
  •   Remove all the protective materials from it. Install it into the drum unit.
  •   Insert the assembly into the printer.
  •   Close the top cover.

Loading The Paper:

  •    Open the front cover of your Brother Dcp J1612W Setup.
  •    Pull out the paper tray.
  •    You can now adjust the paper guides.
  •    Load the paper. Do not exceed the paper limit.
  •    Now, lift the paper support flap.
  •    Close the top cover.
  •    Reinsert the paper tray into the printer.

Connecting The Power Cord:

  •    Connect the provided power cord to the back of the printer and a wall socket. Press the Power button at the front. The Brother DCP 1612W printer turns on immediately. Make the initial setup on the printer control panel by selecting language, date, and time.

Now, you’ve seen the hardware setup procedure. Proceed with the software installation.

Installation Of The Software

The Brother Dcp J1612W Setup comes with an installation disc. So, you can insert it into the CD/DVD drive of your computer. Afterward, run the installer program and continue with the on-screen instructions to finish the setup procedure. When prompted to select the connection method, choose your preferred choice of connection method to perform the task.

Otherwise, establish the communication between your printer and computer by installing the printer driver on your computer; you can get it from the official Brother website.

Brother DCP 1612W Driver Download

The printer driver builds communication between your printer and computer. You can download it from the official Brother website. Since your Brother Dcp J1612W Setup comes with an installation disc, get the Driver and Software package by inserting the CD-ROM into the CD/DVD drive of your computer. Otherwise, click the Driver Download button on this page.

Brother DCP 1612W Driver For Windows

Downloading the printer driver for your Windows computer is done with simple steps.

  •   Using your Windows computer, open a web browser.
  •   Visit the official Brother website.
  •   On the Brother home page, enter the product name in the search field and then click Search. It directs you to the downloads page. From there, choose your preferred OS family and version. Click OK.
  •   On the downloads page, click the printer driver name link. Afterward, you’ll be asked to read the end-user license agreement. Click the Agree to the EULA and Download button to download printer for Brother Dcp J1612W Setup.

Brother DCP 1612W Driver For Mac

Refer to the steps given to download the printer driver for your Mac.

  •    Open a web browser on your Mac computer.
  •    Visit the official Brother website. From there, enter the product name in the search field and then click Search.
  •    It directs you to the downloads page. Choose your preferred OS family and version.
  •    Next, click the printer driver name link and click on the Agree to the EULA and Download button.

Brother DCP 1612W Manual Download

The online user manual is used for referring to the clarifications related to your Brother Dcp J1612W Setup. Here’s how to download it.

  •    Using your computer’s web browser, visit the official Brother website.
  •    On the Brother home page, enter the product name in the search field and click Search. It directs you to the downloads page.
  •   From there, select the Manuals tab in the left navigation bar.
  •   Click Download next to the preferred choice of your user guide.

Brother DCP 1612W Wireless Setup

Here, you’ll find the wireless setup using the Brother installation disc.

  •    Insert the supplied CD-ROM into the CD/DVD drive of your Windows computer.
  •    Go to This PC and double-click the CD-ROM icon. Now, double-click start.exe
  •    The Brother installation wizard appears on the screen.
  •    Click Install MFL-Pro Suite and then click Next.
  •    When asked to select the connection type for Brother Dcp J1612W Setup, choose the Wireless Network Connection option and then click Next.
  •    The manufacturer asks you to plug the USB cable temporarily to finish the wireless setup. When asked to do so, plug in the USB cable.
  •    Complete the further on-screen instructions.
  •    Finally, click Finish.

The wireless setup is now complete.

Brother DCP 1612W Wireless Setup

Brother DCP 1612W Toner Replacement

Whenever your Brother printer displays an error message indicating you to replace the toner cartridge, replace it.

  •    Open the top cover of your printer.
  •    Now, take out the toner cartridge and drum unit assembly.
  •    Remove the Brother Dcp J1612W Setup toner cartridge from the drum unit.
  •    Unpack the new cartridge from the package. Remove all the protective tapes from it.
  •   Insert the newly bought toner cartridge into the drum unit.
  •   Later, install the toner cartridge and drum unit assembly into the printer.
  •   Close the top cover.

Brother DCP 1612W Scan Setup

The Scan setup procedure is done easily. You can follow the procedure below to finish the setup procedure.

Changing Scan Settings Using The Controlcenter4 Utility:

  •    On your Windows computer, launch the ConrolCenter4 application.
  •    Choose the Advanced mode. Now, click the Device Settings tab.
  •    From there, click the Device Scan Settings button. You can find the features available on the next screen. Click on the required tab and choose your preferred settings. Some of the Brother Dcp J1612W Setup settings are:
  •    File type
  •    Resolution
  •    Document size
  •    Scan type
  •    Brightness
  •    Contrast
  •    File name and size
  • You can now cross-check the settings.

  •    Finally, click OK.

Start loading the documents on the flatbed scanner and begin the scanning process.

Brother DCP 1612W Scan To Email

Using the ControlCenter4 utility, you can send your scanned documents as an Email attachment. Refer to the steps given below.

  •    To begin with, load the originals into the flatbed scanner.
  •    On your Windows computer, launch the ControlCenter4 application.
  •    Click the Scan tab at the top.
  •    Now, make changes as per your preferred choice and then click Scan.
  •    Finally, click the Send Email button and click OK.
  •    The scanned documents will be sent to your computer as a new email attachment.
Brother Dcp 1612w Scan To Email

Brother DCP 1612W Troubleshoot

Does your Brother Dcp J1612W Setup trouble you with an issue? Don’t worry. You can troubleshoot it by following the simple and easy solutions from our support page.

Brother DCP 1612W Printer Offline

If your Brother printer is offline or paused, you can refer to the steps given below to resolve the issue.

At first, check the printer status. If the Use Printer Offline option is selected, deselect it.

Set the printer as the default printer

  •   Whenever your printer is offline, ensure that the default printer option is enabled.
  •   On your Windows computer, navigate to Control Panel.
  •   From there, go to the Devices and Printers section.
  •   Locate and right-click your Brother printer icon.
  •   Select Set as default printer.

Cancel all print jobs:

By canceling the print jobs and restarting the Brother Dcp J1612W Setup, you can resolve the issue.

  •    Navigate to Control Panel by clicking the Start menu of your computer.
  •    From there, go to the Devices and Printers section. Find and right-click your Brother printer and select See what’s printing.

Select the Printer menu at the top and then choose Cancel All Documents.

Additional solutions:

  •    Make sure that there are no errors displayed on the LCD screen. If you find any error codes, clear them out to fix the problem.
  •    Uninstall and reinstall the printer driver. It mostly fixes the problem.

Brother DCP 1612W Won’t Turn On

If the Brother printer does not power on, check whether your printer lights up. If not, unplug the power cord from the printer and reconnect it again. After, turn on the Brother Dcp J1612W Setup.

Restore Power To Your Brother Printer:

  •   Disconnect the power cord from the printer for few seconds.
  •   Take out the paper tray completely out of the printer.
  •   Reconnect the printer and turn it on. If the printer turns on, place the paper tray back into the printer.

Brother DCP 1612W Reset Drum Error

If you find any error related to the drum unit, you need to replace the drum unit. Otherwise, reset the drum unit counter after the installation of the new drum unit.

  •   While keeping the printer turned on, open the top cover of your printer. Take the drum unit assembly from the printer. Remove the toner cartridge from the drum unit.
  •   Unpack the new drum unit package and insert the toner cartridge into the new drum unit .
  •   Now, install the drum unit assembly into the Brother Dcp J1612W Setup.
  •   Close the top cover.

Brother DCP 1612W Paper Jam

Refer to the steps given below to resolve the paper jam issue.

  •   At first, turn off the printer.
  •   Pull out the paper tray.
  •   Remove the jammed papers from it.
  •   Now, open the top cover and remove the toner cartridge and drum unit assembly.
  •   Take out the jammed papers from it.
  •   Reinstall the toner cartridge and drum unit assembly into your Brother printer.
  •   Close the top cover.
  •   Load the paper again.
  •   Place the paper tray back into your Brother printer.
  •   Turn on the Brother Dcp J1612W Setup.

G
E
T
S
U
P
P
O
R
T