BROTHER DCP T710W SETUP 2021-06-25T11:17:54+00:00
  • Home »
  • BROTHER DCP T710W PRINTER

INSTRUCTIONS FOR BROTHER DCP T710W SETUP

Brother DCP T710W is an Inktank refill system printer with advanced printing features. This printer supports Wi-Fi for easy wireless printing and an Automatic Document Feeder for multi-page scanning. The Brother DCP T710W setup is quite simple and easy if you go through the instructions given on this page.

UNBOXING & BASIC SETUP

  •    Start by unpacking your printer from the package.
  •    Take out the box contents and keep them aside for later use.
  •    Remove the protective tapes and covers from the printer.
  •    Next, pull the paper tray out from the printer and open the output tray cover.
  •    Load a paper stack into the tray and adjust it with the paper guides.
  •    Refix the output tray cover and push the input tray into your printer.
  •    Connect your printer to a wall outlet using the supplied power cord and turn it on.
  •    Set your basic preferences such as language, country/region, date, and time.
  •    Open the ink tank cover and remove the cap from the ink tank you are going to fill.
  •    Open the ink bottle and remove the protective film from it.
  •    Insert the ink bottle into the nozzle port of the ink tank and close the ink tank cover.
  •    Fill the rest of the ink tanks and start installing the printer software on your computer using the Brother installation disc.
  •    After installing the printer driver, verify the printer functionality.
Brother Dcp T710W Setup

BROTHER DCP T710W DRIVER DOWNLOAD

The driver for your Brother DCP T710W printer is available on the Brother installation disc that came with your printer package. If your computer doesn’t support the Brother installation disc, you can download the driver by clicking the Driver Download button on this page. Also, you can get the driver for your Brother DCP T710W printer from the official Brother site.

BROTHER DCP T710W DRIVER FOR WINDOWS

  •    On your Windows computer, remove any previously installed Brother printer driver.
  •    After verifying that the Internet connection is stable, open the default browser and go to the official Brother site.
  •    Type your printer’s model number in the search field and click the Search button.
  •    Select the printer model from the search result and click the link that directs you to the Downloads page.
  •    Under the Select Your Operating System (OS) section, check if your OS version has been detected correctly. If not, choose your Windows OS version and click OK.
  •    Select the required driver from the displayed list and click the Agree to the EULA and Download button.
  •    Wait until the download is completed.
  •    You can access the driver file from the Downloads folder to run the driver installation.

BROTHER DCP T710W DRIVER FOR MAC

  •    On your Mac, open the default browser and go to the official Brother site.
  •    Input your printer’s model number in the search field and click the Search button.
  •    Select the printer model from the search result and click the link that directs you to the Downloads page.
  •    Wait until your macOS version is detected automatically.
  •    Click OK and select the required driver from the displayed list.
  •    Click the Agree to the EULA and Download button and save the driver to your Mac.

BROTHER DCP T710W MANUAL DOWNLOAD

The manual for your Brother DCP T710W printer is provided along with the printer package during the first-time purchase. If the manual is not available, click the Manual Download button on this page. You can also get the manual from the official Brother site by following these steps.

  •    On your computer, open the default browser and visit the official Brother site.
  •    Input your printer’s model number in the search field.
  •    Click the printer model from the search result and select the link that directs you to the Manuals page.
  •    If necessary, choose your language from the Language drop-down menu.
  •    Select the required manual from the displayed list and click the Download button to save the manual to your computer.

BROTHER DCP T710W WIRELESS SETUP

Using the WPS Push Button method:

  •    Before starting, verify if you have completed the basic printer setup.
  •    Place your printer close to your router to reduce Wi-Fi interference during the wireless setup.
  •    Go to your printer’s control panel and press the Menu button.
  •    Select the Network option using the navigation keys and press the OK button.
  •    Choose the WLAN option and press the OK button.
  •    Select the WPS option and press the OK button.
  •    If your printer shows the ‘WLAN Enable?’ message, select Yes by pressing the up arrow key.
  •    When the printer prompts you to start WPS, go to your router and press the WPS button. Hold the button until the router’s LEDs start flashing.
  •    Also, wait for the printer to connect to your wireless network.
  •    Once the connection is made, your printer will show the ‘Connected’ message on the LCD panel.
  •    Now, connect your computer to the same wireless network and run the driver installation.
  •    Choose the Wireless connection option as your connection type in the driver installation wizard.
  •    Establish the wireless connection between your printer and computer by following the on-screen prompts.
  •    Finish the driver installation and complete the wireless setup.

BROTHER DCP T710W INK REFILL

It is recommended to refill the ink tank on your printer when it is low. You can visually check the ink levels from the ink tanks. You will also get a message on the LCD panel when the printer is running out of ink. To know how to refill the ink tank, follow these steps.

  •    To begin with, open the ink tank cover.
  •    Open the ink tank cap and then remove the cap of the ink bottle.
  •    Remove the seal from the ink bottle and replace the cap.
  •    Remove the nozzle tip of the ink bottle and then insert it into the ink tank.
  •    Gently squeeze the ink bottle to fill the ink tank.
  •    Once you have done refilling the ink tank, close the ink tank cap and then the cover.
  •    When you see the message prompting to confirm that the ink tanks have been refilled. Select Yes to reset the ink dot counter.

BROTHER DCP T710W SCAN SETUP

The Brother DCP T710W printer has a flatbed scanner to scan your documents. The scan setup is quite simple and easy than you think. All you got to do is connect your printer and computer via a USB cable or over a wireless network before starting the scan. When your printer is ready for scanning, place the original document on the scanner glass and use the control panel buttons to start scanning. For detailed instructions about the scan setup, go through the steps given on this page.

BROTHER DCP T710W SCAN TO EMAIL

Using the printer control panel:

  •    Before starting, turn on your scanner and place the original document on the scanner glass.
  •    Next, connect your printer and computer over a wireless network.
  •    Get ready with the email program on your computer.
  •    Ensure that you have installed the Brother printer driver on your computer.
  •    Go to your printer’s control panel and press the Scan button.
  •    Select the Scan to PC option and press the OK button.
  •    Choose the Email option using the navigation keys and press the OK button.
  •    Select your printer’s name from the displayed list and press the OK button.
  •    To scan your document with the default scan settings, press either the Mono Start or Color Start button.
  •    To modify the scan settings, press the Options/Scan Options button and change the following settings.
  •    Scan Type
  •    Resolution
  •    File Type
  •    Document Size
  •    Remove Bkg Clr
  •    After choosing the required scan settings, press the Mono Start or Color Start button to scan your document and save it to the email program as an attachment on your computer.

BROTHER DCP T710W TROUBLESHOOT

If your Brother DCP T710W printer is not working as expected, identify the causes and execute the appropriate troubleshooting steps to fix the issues. It is quite simple to identify the printer issues as you will get error messages on the LCD panel. In case you cannot identify the printer issues, contact us. Here we have given few printer errors and their troubleshooting steps. Go through the steps and fix the faulty printer.

BROTHER DCP T710W PRINTER OFFLINE

  •    Is your printer status offline? Probably there might be a communication breakdown between the devices.
  •    Make sure that your printer is turned on. If it is turned off, check the power cord and restart your printer.
  •    If you have connected the printer over a wireless network, run the Brother Network Connection Repair Tool to detect and resolve the connection issues automatically.
  •    Next, open Control Panel on your Windows computer and click the Devices and Printers tab.
  •    Locate and right-click your printer’s icon and select the See what’s printing option.
  •    Cancel the pending print jobs, if any.
  •    Click the Printer tab and deselect the Use Printer Offline option from the drop-down menu. This will bring your printer online.
  •    If the problem persists, set your Brother DCP T710W printer as the default printer on your computer.

BROTHER DCP T710W WON’T PRINT

  •    If your Brother DCP T710W printer is not printing any documents, check if you have loaded the paper stack properly into the paper tray.
  •    Verify if the printer has been turned on while printing your document.
  •    Check if the connection between your printer and computer is stable.
  •    Try restarting your printer and print the network status report to verify the wireless connection.
  •    On your computer, open the printer properties window and check the print settings.
  •    If necessary, change the print settings to match the print media loaded into your printer.
  •    Save the print settings and ensure that your printer’s name is selected in the Print dialog box.
  •    Try printing your document again and check if the problem has been resolved.

BROTHER DCP T710W RESET INK DOT COUNTER

You can reset the ink dot counter after refilling the ink tank on your Brother DCP T710W printer. When you complete refilling the ink tank, the printer will show a confirmation message. At that time, select the Yes option using the navigation keys to reset the ink dot counter.

BROTHER DCP T710W PAPER JAM

  •    When your printer shows the Paper Jam error on the LCD panel, the first thing you need to do is try to unplug the power cord from the printer.
  •    Once your printer has been turned off, pull the paper tray out from the printer.
  •    Pull the green levers inside the printer to release the jammed paper.
  •    Next, pull the jammed paper out from the printer without damaging the internal parts.
  •    Check for any other jammed paper inside the scanner unit. If so, remove them.
  •    Restart your printer after reconnecting the power cord.

Now, the Paper Jam error should be fixed. To avoid getting the Paper Jam error in the future:

  •    Use printer-supported print media.
  •    Always fan the paper stack before loading it into the tray.
  •    Remember not to adjust the paper stack too tightly with the paper guides in Brother Dcp T710W Setup.
Brother Dcp T710W troubleshoot

G
E
T
S
U
P
P
O
R
T