Home »
Brother Mfc 9130cw Printer Setup

Brother Mfc 9130cw Setup

BROTHER MFC 9130CW is an Electrophotographic LED printer that is compatible with both the Wireless and USB connections. This printer is also compatible with almost all OS types. You can perform print operations from your hand-held device with the help of the Brother iPrint & Scan application. The initial Brother Mfc 9130cw setup and driver installation are quite easy and simple to perform. The overview of the printer setup is given below.

Unpack the Brother printer package.

Inside the package, you can find the Brother MFC 9130CW printer, setup CD, installation guide, a power cord, and a telephone line cord.

The drum unit and toner cartridges are pre-installed within the Brother printer.

Remove all packing materials surrounding the printer.

Make sure to remove the protective tapes surrounding the drum unit and toner cartridges.

Take the paper tray out of the Brother printer.

Fill the paper tray with enough paper and place the tray back into the printer.

Connect your printer to a power outlet using the power cord.

Switch on the Brother printer.

Set the printer preferences as per your desire.

If required, configure the printer for the Fax operation.

After completing the printer hardware setup, perform the software installation on your computer using the setup CD.

Ensure to select the correct connection type during the software installation process.

Finally, try a test print or scan operation on Brother Mfc 9130cw setup printer.

Brother Mfc 9130cw Driver Download

To download the Brother Mfc 9130cw printer driver from its official site, follow the quick steps given below.
Go to the official site of the Brother printer.
Search and select your Brother printer from the product list.
Click the Downloads tab on your Brother printer’s support page.
Make the OS selection as per your computer’s OS.
Select the driver file you wish to install on your computer.
Click the Agree to EULA and Download button.
Wait for the selected driver file to download.
After download, perform the Brother Mfc 9130cw driver installation on your computer.

Brother Mfc 9130cw Driver Mac

The steps to download the Brother MFC 9130CW driver for the Mac OS are given below.

Locate and click the Brother Mfc 9130cw Driver Download for Mac button provided below.
Based on your Mac OS version, the available Brother printer driver file will start to download.
After the download process, you can open it and begin the driver installation process on your Mac computer.

Brother Mfc 9130cw Manual Download

The steps to download the manual for the Brother MFC 9130CW printer are:

Locate and click the Manual Download button provided on this screen.
Now, the soft copy of Brother MFC 9130 printer’s user guide will begin to download.
After download, open it in your computer’s using a PDF viewer and utilize it as per your need.

Brother Mfc 9130cw Connect To Wifi

The guidelines given below will help you in connecting your Brother MFC 9130CW setup printer to WiFi.
Before beginning, make a note of your wireless network’s name and its password.
Switch on your printer, wireless router, and the computer.
Now, press the Settings icon on the printer for Brother Mfc 9130cw connect to wifi.
Select All Settings > Network > WLAN > Setup Wizard > Enable WLAN.
Choose your wireless network by its SSID when listed on the printer’s control panel display.
Wait for your Brother printer to connect to the wireless network and print a WLAN report.
Once it is done, begin the software installation on your computer for Brother Mfc 9130cw connect to wifi.
Make sure to select the Wireless option as the Connection type in the installation wizard.
Follow the on-screen instructions to finish the software installation process on your computer.

Brother Mfc 9130cw Wireless Printing

The Brother MFC 9130CW printer is capable of performing the Wireless printing operation when both are connected over a wireless network.
You can also make use of the Brother iPrint & Scan application to print wirelessly from your Android or iOS device. The instructions given below will help you in performing the print operation from your Android device for Brother Mfc 9130cw wireless printing.
Install and launch the Brother iPrint & Scan application on your Android device.
Make sure that the printer and the Android device are connected to the same wireless network.
Open the file you want to print on your Android device.
Tap the Menu icon on the application viewer to perform Brother Mfc 9130cw wireless printing.
Select the Print option.
Choose your Brother printer from the list.
Set the print preferences as per your needs.
Finally, tap the Print option available at the top right corner of the screen.
Now, your Brother Mfc 9130cw setup printer will start to print the selected document.

Brother Mfc 9130cw Connecting To Pc

You can connect the Brother MFC 9130CW printer to your computer via wireless or USB connection.
The below section will help you to connect the Brother printer to your Windows computer using a USB cable.
Make sure to connect the USB cable only when prompted during the Brother Mfc 9130cw driver installation.
Turn off your Brother printer if it is turned ON.
Insert the setup CD into your Windows computer’s disc drive for Brother Mfc 9130cw connecting to Pc.
Otherwise, open the downloaded driver file to perform the software installation.
Select the USB connection option when prompted to choose a connection type.
Connect your Brother Mfc 9130cw setup printer and computer using a USB cable.
Now, press the Power button on your Brother printer’s control panel to turn it on.
Check whether your Printer Setup is detected by the installation wizard on your computer for Brother Mfc 9130cw connecting to pc.
Proceed with the instructions displayed on the screen.
On the Setup is Complete screen, make the preferences as per your desire and click the Next button.
On the final screen of the driver installation screen, click the Finish button.
Restart your Windows computer and try a test print to check your Brother printer functions.

Brother Mfc 9130cw Scanner Driver Mac

The scanner drivers include software such as TWAIN Driver, ICA Driver, ControlCenter software, and Remote Setup Software.
Most of these drivers are used to perform the scan operation from the Brother printer to email or computer.
TWAIN driver helps the communication between the scanner and applications.
Remote Setup software will let you access the printer settings from your computer. Once you launch the Remote Setup software, all your Brother printer settings will be downloaded to the computer.
ControlCenter software helps you to perform a scan to email or computer easily.
Image Capture Assistant (ICA) is a software for uploading documents from your Brother printer.
You have to connect your printer and the computer to the same network to access this ICA driver.
To download the Brother MFC 9130CW scanner driver for your Mac computer, go through the instructions given below.
On your Mac computer, launch the Safari web browser.
Type the Brother printer’s web address in the address bar.
Navigate to the Brother printer’s support page by following the instructions displayed on the screen.
Click the Downloads tab on the printer’s support page.
Select the Mac option by clicking the radio button beside it.
Similarly, choose the OS version.
Now, the list of drivers available for your Mac computer will be displayed category wise.
Click the Scanner Driver command link in the Drivers section.
To continue the Brother Mfc 9130cw scanner driver download process, click the Agree to the EULA and Download button.
Now, the Brother Mfc 9130cw setup printer scanner driver will begin to download.
Once it is downloaded, open it and perform the Brother Mfc 9130cw driver installation on your Mac computer.

Brother Mfc 9130cw Scan To Email

Brother MFC 9130CW printer supports the scan to email operation. First, configure the scan to E-mail Server feature and then perform the scan to email operation.
Steps to set up the Brother Mfc 9130cw scan to Email server feature

Note down your Brother printer’s IP address. You can find the IP address of your printer on its configuration page.

Now, launch a web browser on your computer.
Type the IP address of your Brother printer in the address bar.
On your Brother printer’s web access page, click the Network tab, followed by Protocol.
Select the POP3/SMTP option by clicking the checkbox beside it.
Now, click the Advanced Settings option.
Enter the SMTP and POP3 protocol information in the given fields.
After filling the fields, click the Submit button for Brother Mfc 9130cw scan to email.
Wait for the data updation process to complete.
Once it is completed, a dialog box with the title Test E-Mail Send/Receive Configuration will appear on the screen.
Tick the checkbox beside the Test E-mail Send Configuration option.
Provide the destination email address in the given field.
Click the Submit button.
Wait for the Testing email configuration process to complete.
Once it is done, you can start to perform the scan to email operation on your Brother printer.
On your Brother Mfc 9130cw setup printer’s scanner glass, load the document to be scanned.
Press the Scan option, followed by to Email for Brother Mfc 9130cw scan to email.
Follow the instructions as displayed on your Brother printer screen.
Finally, press the Start button.
Now, your Brother printer will start to scan the document.
To get remote assistance on the same, contact us.

Brother Mfc 9130cw Scan To Computer

You can scan a document using the Brother MFC 9130CW printer and save it as a PDF on your computer using the ControlCenter4 utility software or printer’s touchscreen. The ControlCenter4 software helps you to perform the scan operation easily. The below section will help you to scan a document as a PDF file to a Windows 7 computer using ControlCenter4.
Before you begin the Brother Mfc 9130cw scan to computer process on your Brother printer, download and install utility software on the computer.
Turn on your Brother MFC 9130CW printer.
Open the scanner unit of your Brother printer.
Place the original document to be scanned on the scanner glass.
Now, on your computer, launch the ControlCenter4 utility software by clicking Start > All Programs > Brother xxx> ControlCenter4.
On the ControlCenter4 screen, locate the Advanced Mode option and click the radio button beside it to perform Brother Mfc 9130cw scan to computer.
Now, select your Brother printer from the Model drop-down menu.
Click the File menu.
Now, the File-ControlCenter dialog box will appear on the screen.
Set the scan preferences as per your needs.
Finally, click the Scan button.
Now, your Brother printer will start to scan the document placed on the scanner glass for Brother Mfc 9130cw scan to computer.
Once the Brother Mfc 9130cw setup printer completes the scan process, it will be saved as a PDF file on your Windows 7 computer.

Brother Mfc 9130cw Reset Drum

Whenever you replace the drum unit in your Brother printer, you must also reset the drum counter. The steps are as follows:

Close the error window on your Brother printer by pressing the X (cancel) button.
Press the Settings icon on your Brother printer’s control panel.
Select the All Settings option, followed by Machine Info for Brother Mfc 9130cw reset drum.
Tap on the Parts Life option.
Now, keep pressing the # button until the message displayed on your Brother printer changes.
The list of drum unit installed on your Brother Mfc 9130cw setup printer will be displayed on the screen.
Select the drum unit that you have replaced recently.
Press the Yes button.
Wait for the on-screen process to complete Brother Mfc 9130cw reset drum.
Once it is completed, press the Home button on your printer’s control panel.
Now, your Brother printer’s drum unit counter is reset successfully.

Brother Mfc 9130cw Paper Jam

Paper jam is one of the common issue faced by printer users. In Brother MFC 9130CW printer the manual feed slot, paper tray, output paper tray, rear end of the machine, inside the machine, and underneath the paper tray are the location where the Brother Mfc 9130cw paper jam can occur. You can solve the paper jam error by removing all the jammed papers from the printer. The below section will help you in clearing the paper jam.

Removing jammed paper from the manual feed slot

Look for jammed paper in the manual feed slot of your Brother printer.
Gently remove the jammed paper from the feed slot if you find any.
After removing it, press the Start button on your Brother printer’s control panel.
To remove the jammed paper present in the paper tray, pull the tray completely out of your Brother printer.
Then, using both your hands slowly remove the jammed paper from the printer to solve Brother Mfc 9130cw paper jam.
Open the scanner cover to remove the jammed paper from the output tray.
Similarly, remove all the jammed papers from your Brother printer.
After removing the jammed papers, try to run a test print on Brother Mfc 9130cw setup printer.