brother-mfc-l9570cdw 2021-08-26T08:11:12+00:00
  • Home »
  • Brother Mfc L9570cdw Printer

INSTRUCTIONS FOR BROTHER MFC L9570CDW SETUP

Brother MFC L9570CDW is a color laser printer that can perform all the essential printer functions. It can print, scan, copy, and fax. It can scan pages at the rate of 52 pages per minute (ppm). The printer’s front panel consists of a large 7-inch touchscreen with a handful of buttons to perform day-to-day tasks effortlessly. As the printer is suitable for business purposes, you can configure its settings, monitor consumables, set security options, generate usage, and other reports on the go. The printer’s input capacity is 300 sheets, which is then split between a 250 sheet cassette and a 50 sheet multipurpose tray. Let us see the Brother MFC L9570CDW Setup in the below sections.

Brother Mfc L9570cdw Setup

UNBOXING & BASIC SETUP

  •   Before going to the unboxing setup, you need to be sure of the box contents.
  •   The box contents include: A power cord, phone cable, four toner cartridges (Black, Cyan, Magenta, and Yellow), CD-ROM, Quick Start Guide, User Manual, and the printer itself (Brother MFC L9570CDW).
  •   Unbox the Brother printer and its remaining accessories.
  •   Remove the packaging materials from the inside and outside of the printer.
  •   It’s time to take out your toner cartridges from the box.
  •   Take off the orange protective materials from the toner cartridges.
  •   Press the front cover release button to open the front cover.
  •   Insert the toners into the respective drum units in Brother MFC L9570CDW Setup.
  •   Make sure that you match the toner cartridges to the same color label on the drum unit.
  •   Close the machine’s front cover.
  •   Connect the power cord between the rear end of the printer and an electrical outlet.
  •   At the top of the printer, you will be able to see the Power button. Press it once to turn on the printer.
  •   Use the control panel to select the language of your choice.
  •   Drag the paper tray out of the machine.
  •   Now, press and slide the paper guides to fit the paper.
  •   Fan a stack of paper.
  •   Load the stack into the paper tray with the printing surface face down.
  •   Push the paper tray completely into the Brother MFC L9570CDW Setup.
  •   Lift the support flap to prevent the paper from sliding off the output tray.
  •   Operate through the control panel and cross-verify that all the printer functions are working correctly without any issues.

BROTHER MFC L9570CDW DRIVER DOWNLOAD

Printer drivers are an essential tool that allows the printer to communicate with your computer. But keep in mind that printer drivers differ for various Operating Systems and do get outdated over time. So, whenever you download the printer drivers, select your OS and version to download the latest printer drivers. In the below sections, we have discussed the Brother MFC L9570CDW Setup driver download and installation steps for Windows and Mac computers. Do check it out.

BROTHER MFC L9570CDW DRIVER FOR WINDOWS

  •   Turn on your Windows computer.
  •   Connect your PC to the Internet.
  •   Open the default web browser to land on the Brother printer’s support page.
  •   Click on the Download section.
  •   Select your Operating System (Windows).
  •   Select the OS version from the drop-down menu.
  •   Click the OK button.
  •   Under the Drivers section, click the relevant driver.
  •   Read the End-User License Agreement (EULA) and click Agree to the EULA and Download.
  •   The download will get started, and the printer drivers will be saved on your PC.
  •   Once the download is over, carry on with the driver installation steps for Brother MFC L9570CDW Setup.
  •   Double-click the downloaded setup file to initialize the installation process.
  •   In the Security Warnings window, click the Run button to extract all the files.
  •   Click Yes in the setup.exe window to proceed further.
  •   Choose the preferred language from the drop-down menu and click OK.
  •   Go through the End-User License Agreement and click on the Yes button.
  •   Now, connect the machine to your PC using a USB cable.
  •   Follow the installation wizard to complete the driver installation process.
  •   Click Finish to close the installation window.
  •   Once done, restart your computer and the Brother MFC L9570CDW Setup.

BROTHER MFC L9570CDW DRIVER FOR MAC

  •   Turn on your Mac computer. Connect it to a stable Internet.
  •   Open the web browser to land on the printer’s support page.
  •   Click the Download section.
  •   Select your Operating System (Mac).
  •   Select the OS version from the drop-down menu.
  •   Click the OK button.
  •   Under the Drivers section, click the relevant driver.
  •   Read the End-User License Agreement (EULA) and click Agree to the EULA and Download.
  •   Once agreed, the printer drivers will be saved on your PC.
  •   Now, you can proceed with the driver installation steps.
  •   Locate the downloaded setup file.
  •   Double-click on it to start the installation process for Brother MFC L9570CDW Setup.
  •   In the Security Warnings window, click the Run button to extract all the files.
  •   Click Yes in the setup.exe window to proceed further.
  •   Choose the preferred language from the drop-down menu and click OK.
  •   Go through the End-User License Agreement and click on the Yes button.
  •   Choose one of the setup types that suits your needs (Standard or Custom) and click Next.
  •   Now, connect the machine to your PC using the USB cable.
  •   Follow the installation wizard to complete the driver installation process.
  •   Click Finish to close the installation window.
  •   Once done, restart your computer and printer.
  •   Now, you can print a test page on Brother MFC L9570CDW Setup by following these steps:
  •   Start > Control Panel > Category > Small icons > Devices and Printers.
  •   Right-click on the Brother printer and select Printer properties.
  •   Click Print Test Page.
  •   Explore all the printer functionalities directly from your Mac.

BROTHER MFC L9570CDW MANUAL Download

  •   Go to your default web browser and land on the Brother printer’s support page.
  •   Click on the Manual section to expand the User’s Guide, Setup Guide, Additional Feature Guide, and Appendix.
  •   Choose your language and then click the Download button to view the printer’s manual.
  •   Scroll down the page to know more about your Brother MFC L9570CDW Setup.
  •   However, you can click the Download button to save the manual for offline purposes.
  •   Apart from this, you will get a physical copy of the printer’s manual inside the box.

BROTHER MFC L9570CDW WIRELESS SETUP

Brother MFC L9570CDW supports both wired and wireless connectivity options so that you can make the most of it during your printing journey. Some of the standard interfaces include: 802.11b/g/n Wi-Fi, Gigabit Ethernet, Wi-Fi Direct, NFC, USB 2.0.

Other mobile and cloud features include: Brother iPrint&Scan, Brother Office print, Brother Print Create Center Templates, Cortado Workplace, Google Apps for Business, Android Mopria, and Apple AirPrint.

NOTE: Before performing the wireless setup, you need to be aware of the wireless network settings of your router. Check the base or backside of the router to find the Network Name (SSID) and Network Password (Password).

Brother Mfc L9570cdw Wireless Setup
  •   Turn on your Brother MFC L9570CDW Setup.
  •   Begin by pressing the Wi-Fi icon on the touchscreen.
  •   Tap on Setup Wizard from the option list.
  •   When the Enable WLAN? screen appears, press Yes.
  •   Select your SSID or network name from the list.
  • NOTE: If your network is set to hide the network name, you must manually add the network name.

  •   Once you have selected the SSID, enter the network key using the on-screen keyboard.
  •   Confirm that your network key is correct and press OK.
  •   Once the wireless connection is established, press OK.
  •   Download the full driver and software package on your PC.
  •   Follow the above-given instructions to install the Brother MFC L9570CDW Setup drivers on your PC.
  •   On the Connection Type screen, choose Wireless Network Connection (Wi-Fi).
  •   Select your Brother machine and click Next.
  •   Finally, click Finish to complete the wireless setup.

BROTHER MFC L9570CDW TONER REPLACEMENT

  •   Make sure that the Brother machine is powered on during the entire toner replacement process.
  •   Press the front cover release button and open the front cover.
  •   Hold the drum unit’s green handle.
  •   Next, pull the drum unit out of the machine.
  •   Hold the handle to remove the toner cartridges gently.
  •   Clean the corona wires.
  •   Unpack the new toner cartridges.
  •   Remove the protective cover.
  •   Insert the toner cartridges into the respective slots in Brother MFC L9570CDW Setup and push until you hear a clicking sound.
  •   Once done, close the machine’s front cover.

BROTHER MFC L9570CDW SCAN SETUP

  •   Load the document.
  •   From the printer control panel, tap on the Scan option.
  •   Use the left and right navigation keys to select Scan to PC.
  •   If your Brother printer is connected over the network, swipe up or down to display the computer where you want to send the scanned document.
  •   If your display screen prompts you to enter the PIN, use the LCD screen to enter the PIN.
  •   The scanned document will be passed on to the selected computer.
  •   If you want to change the scan settings, press [options], and then go to the next step.
  •   To continue with the default scan settings, press the Start button.
  •   The Brother MFC L9570CDW Setup will start scanning.
  •   If you have planned to scan both sides of the document, press [2-sided scan], and then select the document type.
  •   However, you can change the scan settings according to your needs (Resolution, File Type, Scan Type, Scan Settings, Brightness, Contrast, etc.).
  •   Press Start to begin scanning from your Brother printer

BROTHER MFC L9570CDW SCAN TO EMAIL

  •   Load the document.
  •   Connect the Brother printer with your PC wirelessly.
  •   Press Scan from the control panel.
  •   Use the navigation buttons to display the to PC icon (The PC icon should be highlighted in blue).
  •   Press the to PC icon followed by the to E-mail icon.
  •   If you have properly connected the Brother MFC L9570CDW Setup with your PC, then your PC name will be displayed on the LCD screen.
  •   Press Start to begin the scanning process without changing the additional settings.
  •   The Brother printer scans the document and saves it in the form of a file attachment.
  •   Furthermore, it launches your email application and opens a new, blank email message with the scanned document attached.
  •   Choose 2-sided scan if needed.
  •   Press the Scan Settings option and then press Set at Device.
  •   Change the scan settings according to your needs and press the OK button.
  •   Press Start.
  •   By now, the Brother MFC L9570CDW Setup launches your email application and opens a new, blank email message with the scanned file attached.

BROTHER MFC L9570CDW TROUBLESHOOTING

Troubleshooting helps find the root cause of the issue and provides solutions more quickly. When troubleshooting steps are followed in the correct way, you can quickly sort out the problem. But you need to gather sufficient information about the issue before proceeding further. In the below sections, we have given some of the most commonly occurring printer issues like: Printer Offline, Printer not turning on, Resetting the drum error, and Paper jam. So, do check out the below sections.

BROTHER MFC L9570CDW PRINTER OFFLINE

  •   If your Brother machine’s LCD screen is blank, then there is a possibility that your device may not be powered on.
  •   Press any button to see if Brother MFC L9570CDW Setup wakes from sleep mode.
  •   Check the LCD screen for any error message; if the LCD screen shows an error like Paper Jam or Toner Empty, then fix the problem as soon as possible.
  •   If you are using a USB cable, try connecting it directly to the computer and not via a hub.
  •   In the case of an Ethernet cable, try to print a network configuration page to check the IP address.
  •   Make sure that your Brother printer is set as the default printer.
  •   Open the Control Panel window.
  •   Click Hardware and Sound > Devices and Printers.
  •   Right-click on your Brother printer.
  •   Choose the Set as default printer option from the drop-down menu.

Have a look at the wireless connections

If you have connected the Brother MFC L9570CDW Setup wirelessly, then checking the wireless connection is one of the best troubleshooting methods one needs to follow.

  •   If your router is unable to communicate, then power reset the router.
  •   First, disconnect the power from your router.
  •   Wait patiently for a few seconds and then reconnect again.
  •   Ensure that there is minimum to no interference between the router and the network devices (Computer, Printer).
  •   Try to reboot your computer as well.
  •   Once the proper connections are made, see whether the printer and router are able to communicate with each other.
  •   If yes, then the printer offline issue might get solved.

BROTHER MFC L9570CDW WON’T TURN ON

  •   Cross-check whether the Brother MFC L9570CDW Setup is in sleep mode.
  •   When the Brother printer is in an idle state for a certain period of time, then it will enter into sleep mode.
  •   Make sure that the power cord is connected directly to the electrical supply.
  •   Also, make sure that the socket is working properly.
  •   If available, try a different power cord.

Hope the above-mentioned troubleshooting steps help you get rid of the issue.

BROTHER MFC L9570CDW RESET DRUM ERROR

  •   If your machine displays the drum error, then try to replace the toner cartridges (Black, Cyan, Magenta, and Yellow).
  •   Remove the toner cartridges and drum unit from the Brother MFC L9570CDW Setup.
  •   Push down the green lock lever.
  •   Remove the toner cartridge from the drum unit.
  •   Unpack the new toner cartridges.
  •   Once replaced, close the front cover.
  •   Turn on the printer.
  •   Press the Settings icon.
  •   Touch All Settings.
  •   Choose Machine Info or Machine Information > Parts Life.
  •   Press and hold Drum or Drum Life until the display message changes.
  •   Press Yes and the Home button.
  •   Finally, restart your machine.

BROTHER MFC L9570CDW PAPER JAM

  •   Check the machine’s display screen. It will display where the actual paper jam has occurred.
  •   Now, unplug your Brother MFC L9570CDW Setup from the AC power outlet (electrical socket).
  •   Gently pull the paper tray out completely.
  •   Remove the jammed paper.
  •   Make sure that you don’t leave any bits of paper inside the machine.
  •   Put the paper tray back in.
  •   Ensure that the paper support is fully inserted into the machine.
  •   Once you have successfully removed the jammed paper, reconnect the power cord and turn on the printer.

Furthermore, if you face any issues with your Brother MFC L9570CDW Setup, then do call our well-trained technicians to solve all your queries.


G
E
T
S
U
P
P
O
R
T