brother-printer-mfc-7360n-troubleshooting 2020-06-09T16:00:59+00:00
  • Home »
  • Brother MFC-7360N

Brother MFC 7360N Troubleshooting

You may face issues with your Brother printer when you use it for a prolonged time without proper maintenance. Make sure to run routine maintenance on the printer once in a while. Apart from these maintenance issues, there are other issues that you may face from time to time, including connection issues, print quality issues, etc. Carry out these below-mentioned steps on brother printer MFC 7360N troubleshooting.

Brother MFC 7360N Troubleshooting

Brother Mfc 7360n Paper Not Feeding

  •   Pull out the paper input tray and clear any paper jammed inside the printer.
  •   If there is no paper in the input tray, load paper.
  •   The paper not feeding issue may also occur if more dust is accumulated in the paper feed rollers.
  •   Clean the rollers using a dry lint-free cloth and close the door.
  •   Now, restart the printer to fix the issue.

Brother Mfc 7360n Replace Toner Cartridge Error

  •   If you are receiving the toner cartridge error frequently, you have to reset the toner.
  •   Keep the front door opened and press the Clear key.
  •   Now, press the * key and then press the 0 button two times. Then, tap OK.
  •   When the drum replacement menu appears, press the * key. Then, tap the 0 button twice. Then, touch OK.
  •   Now, close the front door, and the issue will be resolved.
  •   Follow these steps to configure the Brother Printer MFC 7360N troubleshooting.

Brother Printer Mfc 7360n No Paper Error

  •   If you receive the no paper error, check whether there is paper inside the input tray.
  •   Pull out the input paper tray and remove the paper stack from it.
  •   Make sure that the paper is not folded and load the stack of paper into the tray.
  •   Move the guides to the edges of the paper and now, insert the tray back to the printer.
  •   Set the correct paper settings on the printer to fix the issue.

Brother Mfc 7360n Printing Problems

If you are facing printing problems, print a test page to check for any issues.

  •   For quality issues, open the front door and take out the drum unit.
  •   Now, clean the corona wire using a soft cloth.
  •   Move the green tab to the home position.
  •   If the drum unit or toner cartridge is damaged, replace them.
  •   Plug the power cord out of the printer and connect it back after a few seconds.
  •   If the printer doesn’t print, check the LCD screen on the printer for any errors.
  •   If any error is displayed, resolve the error by following the on-screen instructions.
  •   Using these steps to configure the Brother Printer MFC 7360N troubleshooting.

Brother Mfc 7360n Fax Not Working

  •   Verify whether the telephone line cord is connected to the LINE port on the printer.
  •   Set the correct date and time settings on the printer.
  •   If you can’t send a fax to a particular number, check whether the number is working.
  •   Press the Menu button and go to Initial Setup. Then, select Tone/Pulse, and tap OK.
  •   Now, press Stop/Exit to fix the issue.

Brother MFC 7360N USB Not Recognized

  •   Check if the USB cable is defective. If so, replace the cable.
  •   Try using an A/B USB cable, which is no longer than 6 feet.
  •   Disconnect the power cord from the printer and connect it after 30 seconds.
  •   If you have connected the printer and computer using a USB hub, check the connections.
  •   Remove the USB hub and connect the printer and computer directly to resolve the issue.
  •   If the error appears again, try connecting your printer to another computer to check if it is a port issue.
  •   If the error window doesn’t appear on another computer, the problem lies on the USB port of your computer.
  •   Follow these steps to configure the Brother Printer MFC 7360N troubleshooting.

Brother Mfc 7360n Not Printing

  •   If the printer doesn’t print, check whether the printer status is offline.
  •   If any error is displayed on the printer screen, resolve it by following the instructions on the screen.
  •   Go to the compute connected to the printer and launch the Control Panel window.
  •   Select Hardware and Sound. Then, click Devices and Printers.
  •   Right-click on the printer and click the Set as default printer option.
  •   If you are using a wired network, check all the connections.
  •   Make sure that the printer driver is properly installed.
  •   If the issue persists, uninstall and reinstall the driver from the official Brother website.
  •   By following these steps to configure the Brother Printer MFC 7360N troubleshooting.

Brother Mfc 7360n Paper Jam

If any paper is stuck inside the Brother printer, you can follow the steps that are given below.

  •   Turn off the printer and allow the printer to cool down for at least 10 minutes.
  •   Pull out the input paper tray and check for any paper jams inside the printer.
  •   If you find any jammed paper inside, take out the paper using both hands.
  •   Remove the toner cartridge and clear any paper scraps or bits. Then, reinstall the cartridge.
  •   Open the rear door and dispose of the jammed paper.
  •   Once you have removed the paper, restart the printer and print again.
  •   Use this procedure to configure the Brother Printer MFC 7360N troubleshooting.

G
E
T
S
U
P
P
O
R
T