canon pixma ts9120 setup 2019-10-28T09:44:15+00:00

Canon Pixma Ts9120 Setup Guide

Perform the following guidelines to set up Canon Pixma TS9120 printer.

  •   First, check for the manufacturer’s seal and then unpack the Canon Pixma TS9120 Printer.
  •   Unseal the Canon Pixma TS9120 printer and then remove the printer out of the box.
  •   Make sure to remove all the protective tapes both from inside and outside the Canon Pixma TS9120 Setup printer.
  •   Plug the power cable into the correct port at the rear of the Canon Pixma TS9120 printer and then connect its other end to the electrical outlet.
  •   Next, long-press the power button to turn on the Canon Pixma TS9120 printer.
  •   Proceed with the on-screen prompts on the Canon Pixma TS9120 printer.
  •   Next, load the ink cartridges in their slots.
  •   Now, insert the paper in the paper input tray and adjust the width guides.
  •   Now, connect the Canon Pixma TS9120 printer to the computer.
  •   Connect the Canon Pixma TS9120 printer and the computer to the same wireless network.
Canon Pixma Ts9120 Setup

Canon Pixma Ts9120 Driver

The Canon Pixma TS9120 printer driver can be downloaded from the manufacturer’s site. Make sure to specify the operating system version that you are using before downloading the printer driver. Choose the language and then save the driver file on the computer. Next, right-click the downloaded file and run it to install the printer driver.

Canon Pixma Ts9120 Manual

The Canon Pixma TS9120 printer manual can be downloaded from the manufacturer’s site. This manual can provide you with information regarding the setting up of the printer, copying, scanning, printing, and troubleshooting. Make sure to save the downloaded file in the desired location for further purpose.

Canon Pixma Ts9120 Wireless Setup

Proceed with the following instructions for Canon Pixma TS9120 printer.

  •   First, start with Easy Wireless Connect on the Canon Pixma TS9120 printer.
  •   First, ensure that the Canon Pixma Ts9120 Setup printer is powered on.
  •   Touch the Home icon on the LCD screen.
  •   Next, touch the Wireless icon and then touch the LAN settings.
  •   Now, touch Wireless LAN and then touch the Wireless LAN setup.
  •   Touch the Easy Wireless connect and touch Yes.
  •   Once the Canon Pixma TS9120 printer is done, go back to the Setup application screen.
  •   Now, proceed with the Setup process.
  •   Next, download and run the setup file.
  •   First, choose Start Setup. Select the correct region and then click Next.
  •   On the License Agreement screen, choose Yes and then click Next.
  •   Now, choose Yes after confirming the Connection method.
  •   On the Wireless router screen, choose the Wireless router to connect the printer and key in the SSID password. Click Next.
  •   Once the Network Connection is made, click Next.
  •   Click Next once the setup is done.
  •   For Mac users, click Next on the Startup screen.
  •   Type the computer Username and password and then install the Helper.
  •   Now, choose Start Setup. Choose a Region and then click the Next option.
  •   On the License Agreement screen and click Yes.
  •   The status check will appear. Choose Yes on the Connection method screen.
  •   Next, the Select Wireless router screen will appear.
  •   Choose the wireless router to connect to the Canon Pixma TS9120 printer and key in the credentials.
  •   Once the network connection is made, click the Next button.
  •   Now, install the Canon Pixma TS9120 printer driver.
  •   Click the Add Printer option on the Add Printer screen.
  •   Under the Add menu, choose Canon Pixma Ts9120 Setup printer from the Kind column.
  •   Choose AirPrint from the pull-down list. On the Add Printer screen, click the Next button.
  •   Once the setup is done, click Next.

Canon Pixma Ts9120 Wi-Fi LAN 

The guided instructions given below will help you connect the Canon Pixma TS9120 printer over a wireless network.

  •   First, enable the Easy Wireless Connect option on your printer and connect it to the Wi-Fi network.
  •   Switch on your Canon Pixma TS9120 printer.
  •   Wait for your printer to become idle & silent.
  •   Tap the Home icon available on the printer’s main screen.
  •   Touch the Network icon followed by the LAN Settings option.
  •   Tap  Wireless LAN Wireless LAN setup Easy Wireless Connect Yes.
  •   Once the Canon printer finishes the Easy Wireless Connect process, press the OK button on the printer’s home screen.
  •   Start installing the Canon Pixma TS9120 printer driver on your computer system.
  •   Make sure to connect the Canon Pixma TS9120 printer and your device to the same wireless network.
  •   You can use the installation CD provided by the manufacturer during the product purchase for installing the print driver on your computer.
  •   If you want to install the latest version of the print driver, then download the upgraded version of your Canon printer driver from its official site.
  •   After downloading the upgraded version of the print driver, install it on your computer by following the instructions given below.
  •   Double-click the downloaded Canon Pixma Ts9120 Setup print driver .exe file to open it.
  •   Click the Start Setup button to begin the installation process.
  •   Choose your place of residences and click the Next button.
  •   Follow the printer’s on-screen instructions to finish the installation.
  •   Select your Wi-Fi router from the drop-down menu and enter its security key in the given text field.
  •   When prompted, choose any optional application software you wish to install and click the Next button.
  •   Once the install process is complete, the Installation Completed Successfully dialog box will appear on the screen.
  •   Click the Exit button. To check the printer functions, try a test print or copy operation on your Canon printer.

Canon Pixma Ts9120 Scan Setup

To perform the scan operation on your Canon Pixma TS9120 printer, read and proceed with the instructions given below.

  •   Check if your Canon Pixma TS9120 printer is turned on and ready for the scan operation.
  •   Open the scan door of the printer.
  •   Make sure that the scanner glass is clean.
  •   If you find any particles on the scanner glass using a soft cotton swab.
  •   Now, place the document you wish to scan on the scanner glass.
  •   Enable the IJ Scan Utility feature on your system. To enable IJ Scan Utility on your system, follow the instructions given below.
  •   Windows 10:  Click Start All apps Canon Utilities IJ Scan Utility.
  •   Windows 7: Select Start All Programs Canon Utilities IJ Scan Utility IJ Scan Utility.
  •   On the IJ Scan Utility window, you can set the paper size, resolution, PDF settings, Data format, Save in, etc., options.
  •   Select the  Save to Email or Save to Computer  option from the Save in the field.
  •   After that, click the OK button. Now the  Canon Pixma Ts9120 Setup printer  starts to scan the placed document.
  •   Once the Canon Pixma TS9120 printer scans the placed document, the scanned copy is sent to your computer or email address based on your selection.

How to Copy on Canon Pixma Ts9120 ?

Canon Pixma Ts9120 Copy
  •   Switch on your Canon Pixma Printer if it is turned On.
  •   Check if the printer’s main tray contains enough paper to perform the copy operation.
  •   Choose the Copy icon on the printer’s home screen.
  •   Select the Standard Copy option from the Copy menu.
  •   Place the document you wish to copy on the scanner glass.
  •   Now, set the copy settings, layout, number of copies on the Copy Preferences screen.
  •   Press the Color or Black button.
  •   Now the Canon Pixma TS9120 printer starts the copy operation as per your wish.

Canon Pixma Ts9120 Mobile Printing

To perform a mobile printing operation on your Canon Pixma TS9120 printer, first, download & install the Canon PRINT Inkjet/SELPHY application on your hand-held device.

  •   Make sure to connect the Canon Pixma TS9120 printer and your Android or iOS device to the same Wi-Fi network.
  •   Choose the document or photo file you wish to print on your device.
  •   Touch the Share button followed by the Print option.
  •   Select your Canon Pixma Ts9120 Setup printer from the list.
  •   Tap the Print option.
  •   Wait for the printer to finish the print operation.
  •   Once the printer finishes the print operation, take the printed document out of the tray, and check the print quality.

Canon Pixma Ts9120 Airprint Setup

The step-by-step instructions given below will help you to perform the AirPrint operation on your Canon Pixma TS9120 printer.

  •   Before you begin the AirPrint operation, check if your iOS device and the Canon Pixma TS9120 printer are connected to the same wireless or wired network.
  •   Now, switch on your Canon printer if it is turned off.
  •   Check if the main tray of the printer contains enough paper to perform the AirPrint operation.
  •   Choose the document or photo file you wish to print on your iOS device and open it.
  •   Tap the Share icon available on the screen.
  •   Choose the Print option from the menu list.
  •   Select your Canon printer from the Printer Options section.
  •   If required, set the print preferences and tap the Print button.
  •   Now the Canon Pixma Ts9120 Setup printer starts to print the selected document or photo file.
  •   You can contact our printer technical support team if you face any issues during the print operation.
  •   Click the Call button available on this screen to contact our technical support team.

Canon Pixma Ts9120 Google Cloud Print  

To perform the Cloud Print operation on your Canon Pixma TS9120 printer, first, you need to have a Google account. The detailed procedure on how to perform the Google Cloud Print operation is given below.

  •   As discussed above, first, check if you have an account with Google.
  •   If not, create a new account using your data.
  •   To create the Google account, go to Google’s official web site and click the Sign in button.
  •   Leave the username & password fields blank. Click the  Create an account  button.
  •   Perform the on-screen instructions to create the account.
  •   After creating the account on Google, register the Canon printer with your Google account.
  •   You can do the registration through Google Chrome or Printer.
  •   To perform the registration through Google Chrome, follow the instructions given below.
  •   Open Google Chrome, sign into your Google account, and click the Settings menu.
  •   Click  Show advanced settings Manage Google Cloud Print Canon Pixma TS9120 Add printers OK Yes.

Registration through your Canon printer:

  •   Make sure that your Canon TS9120 printer is turned On.
  •   Touch the Settings icon on the home screen of the printer.
  •   Tap  Web service setup Web service connection setup Google Cloud Print setup Register with Google Cloud Print Yes Next OK.
  •   Once your Canon printer is registered with the Google account, you can start the print operation.
  •   Sign into your Google account and click the  menu  icon.
  •   Choose the Print option from the menu list.
  •   If your Canon printer is not displayed in the  Destination field, click the Change button and select your Canon printer from the list.
  •   After that, click the Print button.
  •   Now your Canon Pixma Ts9120 Setup printer starts the print the operation.

Canon Pixma Ts9120 Troubleshooting

The Canon printer is good at performing the print, scan, or copy operation. You can perform any printer related operations easily on the Canon Pixma TS9120 printer. But, at the same time, some issues also take place during the print, copy, or scan operation. You can fix these issues easily by performing the simple troubleshooting instructions. To know how to fix the Canon printer issues, read and proceed with the troubleshooting instructions given in this webpage.

Canon Pixma Ts9120 Not Working

To resolve the Canon Pixma TS9120 printer not working issue, read and proceed with the troubleshooting instructions given below.

  •   First, press the Power button on its control panel to turn it On.
  •   If the printer remains turned off or at sleep mode, then check if the power cord is connected properly into the printer and press the Power button.
  •   If the issue persists, then disconnect the power cable from the printer and reconnect it after a while.
  •   If the Canon printer not working issue remains unresolved even after performing the above troubleshooting instructions, then it may be due to hardware issue on your Canon Pixma Ts9120 Setup printer.
  •   Contact the Canon printer manufacturer to fix the hardware issue of your printer. 

Canon Pixma Ts9120 Not Scanning

To fix the Canon Pixma TS9120 printer not connecting to Wi-Fi network, read and proceed with the guided instructions given below.

  •   If the ScanGear does not start, then first, check if the Canon Pixma TS9120 printer’s MP drivers are installed on your system.
  •   Make sure to select your Canon printer from the application’s menu.
  •   Check if your system application supports TWAIN.
  •   Try to save the image files using IJ Scan Utility, and then open the files on your system’s application.
  •   If the issue remains unresolved, then contact our printer technical support by clicking the Call button available on this screen.
  •   If you are unable to perform the scan operation properly using the Auto Scan features, first, check if the document to be scanned is placed correctly on the glass.
  •   If not, place the document properly and then try to perform the scan operation on Canon Pixma Ts9120 Setup printer.
  •   If the application does not support multiple item scanning, then scan each document one-by-one.
  •   To get more support on the printer not scanning issue, click the Call button to contact our printer experts.

Canon Pixma Ts9120 Not Copying

The guided instructions given below will help you to troubleshoot the Canon Pixma TS9120 printer not copying issue.

  •   First, check if the printer is working properly. 
  •   Switch on your Canon Pixma TS9120 printer.
  •   Navigate to the Setup menu from your printer’s Home screen.
  •   Tap  Maintenance Print nozzle check pattern Yes.
  •   Now the printer’s Nozzle Check report will be printed.
  •   If you see color or patterns on the printout, then clean the print head by following the instructions given below.
  •   Choose the Cleaning option from the Maintenance menu on Canon Pixma Ts9120 Setup printer.
  •   To confirm the cleaning operation, touch the Yes button.
  •   After cleaning, a dialog box will appear on the printer screen which will prompt you to press the Yes button to print another Nozzle Check report.
  •   f the issue remains unresolved, then contact our printer technical support team by clicking the Call button available on this screen.
Canon Pixma Ts9120 Not Copying

G
E
T
S
U
P
P
O
R
T