Epson Ecotank Et 4800 2021-09-25T09:09:06+00:00

INSTRUCTIONS FOR EPSON ECOTANK ET 4800 SETUP

Epson Ecotank Et 4800 Setup

The Epson EcoTank ET-4800 printer setup is done with simple steps. It involves unpacking the printer box, connecting the power cord, filling the ink tanks, paper loading, and also software installation. Do you wish to set up the Epson ET-4800 printer? Check this post to know more about the Epson Ecotank Et 4800 Setup procedure.

UNBOXING AND BASIC SETUP

Unboxing:

  • At first, you need to unpack the product box. Check all the components present inside the box. Take out the packaging materials one by one.
  • Remove all the protective materials from the inside and outside of your printer.
  • Make sure that the printer is ready to turn on.

Turning on the printer:

Connect one of the ends of the power cord to the back of your printer and the other end to an electrical outlet. Turn on the Epson printer by pressing its Power button.

Pouring ink:

It’s time to fill in the ink tanks. Initially, make sure that the Epson Ecotank Et 4800 Setup is turned on.

  • Open the front cover of the printer.
  • Locate and open the black ink tank cap. Unwrap the ink bottle and remove all the protective tapes from it.
  • Insert the ink bottle by standing it upright into the filling port.
  • Wait until the ink tank fills completely. Repeat the procedure for the other colors.
  • Begin the ink charging process. After completing the ink charging process, you can make sure that the printer is ready for the paper loading process.

Paper loading:

Raise the paper support and adjust the paper guides.

Insert the paper. Ensure that you do not overload the paper. Lower the paper support and pull out the output tray.

The hardware setup is now complete. Since the Epson Ecotank Et 4800 Setup is not yet connected to your computer, install the printer driver to establish the communication between your computer and printer. Proceed to the software installation.

Software installation:

The Epson EcoTank ET 4800 printer comes with an installation disc. So, just insert the installation disc into the CD/DVD drive of your computer. The installation wizard appears on the screen. If it does not appear, go to the Downloads folder on your computer and locate the CD icon. Double-click on it to begin the installation.

When prompted, select the connection method and continue to perform the on-screen instructions. Alternatively, download the Epson Ecotank Et 4800 Setup driver from the official Epson website.

EPSON ECOTANK ET 4800 DRIVER

Every printer manufacturer provides you with a specific printer driver. Basically, the printer driver is used for establishing communication between your printer and computer. Download the printer driver from the official Epson website or just click the Driver Download button from this page.

EPSON ECOTANK ET 4800 DRIVER FOR WINDOWS

Do you wish to download the printer driver for your Windows computer? Refer to this section.

  • Using the default web browser, go to the official Epson website.
  • On the Epson home page, enter the product name in the search bar and then click Search. It directs you to the Downloads page.
  • On the Downloads page, select the required OS, which is Windows, and then click GO.
  • Now, click the Download button next to your preferred Epson Ecotank Et 4800 Setup driver.

EPSON ECOTANK ET 4800 DRIVER FOR MAC

Downloading the printer driver for your Mac computer is simple. Just refer to the steps given below.

  • Using the default web browser, go to the official Epson website.
  • Enter the product name in the search bar and then click Search. It directs you to the Downloads page.
  • Choose the required OS (Mac) and its version and then click GO.
  • Click Download next to the printer driver.

EPSON ECOTANK ET 4800 MANUAL DOWNLOAD

Epson provides you with an online user manual, which is used for clearing your doubts while setting up the printer. Do you want to download it? Refer to the steps given below.

  • On your Windows computer, open a web browser.
  • Visit the official Epson website.
  • On the Epson home page, enter Epson Ecotank Et 4800 Setup in the search bar and then click Search.
  • It directs you to the Downloads page.
  • On the Downloads page, click the Manuals and Warranty tab.
  • Click Download next to the user guide.

EPSON ECOTANK ET 4800 SCAN SETUP

The scan setup isn’t as difficult as you might think. Refer to this section for the scan setup of your Epson EcoTank ET 4800 printer.

Scan setup when using the Event Manager program:

  • The Event Manager program is used for scanning the documents and also changing the default scan settings.
  • On your Windows computer, go to the Start menu and then click Epson Ecotank Et 4800 Setup software.
  • Select the Event Manager option.
  • Click the Make Job Settings button.
  • Go to the Edit Job Settings button and then select the scan job settings.
  • Now, make the necessary scan settings and then click OK.
  • Finally, click Close. It closes the Event Manager program.

That’s it. The scan setup is now complete. Begin the scanning process.

EPSON ECOTANK ET 4800 SCAN TO COMPUTER

Do you want to scan the documents to your computer with the scanner feature that the printer offers? Do it with simple steps using the printer control panel.

Scanning the document using the printer control panel

  • Initially, make sure that the Epson Ecotank Et 4800 Setup is connected to your computer, and then the product software is installed on your computer.
  • Place the document on the scanner glass.
  • Now, press the left or right arrow button to select the Scan option. There are two options available. They are:
  • Scan the document as JPEG
  • Scan the document as PDF
  • Choose one of the available options and then select Preview on computer to preview the document before scanning.
  • Cross-check the settings that you’ve made. Next, press the Start button to begin the scanning process. The document will now be scanned successfully.

EPSON ECOTANK ET 4800 MOBILE PRINTING SETUP

Are you planning to use Mopria Print Service to print from your mobile? Refer to the steps given below to perform the mobile printing setup.

  • Initially, connect the Epson Ecotank Et 4800 Setup to a wireless network using the wireless router.
  • Go to the Google Play Store application on your mobile for downloading the Mopria Print Service.
  • Type Mopria in the search bar and then click Search.
  • From the search results, select Mopria Print Service and then click Install.
  • Now, enable Mopria Print Service.
  • Connect your mobile to the same wireless network as that of your printer.
  • You’re now ready to print the documents.

EPSON ECOTANK ET 4800 WIRELESS SETUP

Epson Ecotank Et 4800 Setup

Do you want to connect the Epson Ecotank Et 4800 Setup to a wireless network? It is simple. If you have a WPS-enabled wireless router, the wireless setup is easy to perform.

  • To begin with, complete the router setup. Ensure that your Windows computer has an active Internet connection.
  • Initially, press the WPS button on your wireless router.
  • Press the arrow buttons to select the WiFi setup option on your printer screen and then press OK.
  • Again, press the arrow buttons. When you see the WiFi (recommended) option, press the OK button.
  • Now, select the Push Button Setup (WPS) option and continue with the further on-screen instructions.
  • The Wi-Fi icon is displayed on the LCD. If you see a blue-colored Wi-Fi symbol, you can be sure that the printer is securely connected to the wireless network.
  • If you wish to connect the Epson Ecotank Et 4800 Setup using the Wi-Fi Direct method, refer to this section for simple steps.

Connecting Epson EcoTank ET 4800 printer using Wi-Fi Direct

  • On the printer control panel, press the arrow buttons to select the WiFi Setupoption.
  • Navigateto Wi-Fi Direct andthenpress OK.
  • On your device, download the Epson Smart Panel application and install it.
  • Open the application and enter the details appearing on the LCD screen.
  • Finally, press OK to exit the application. You’ll see an AP icon on the LCD screen. Ensure that the Epson EcoTank ET 4800 printer is successfully connected using the WiFi Direct mode.

The wireless setup is now complete.

EPSON ECOTANK ET 4800 AIRPRINT SETUP

Since the AirPrint technology enables you to achieve instant wireless printing, you can perform the AirPrint setup without installing the printer software. Here’s how to do it.

  • Initially, make sure that the Epson Ecotank Et 4800 Setup has enough paper to print. Otherwise, load the paper by not exceeding the paper limit.
  • Connect the printer and the device to the same wireless network.
  • On your device, open an app such as Gallery or Email.
  • Tap the Share icon and then scroll down to the bottom.
  • Tap the Print option and then tap Select printer.
  • Choose the Air-Print enabled printer and then start selecting the number of copies.
  • Cross-check the option. Tap Print to begin the printing operation.
  • The AirPrint setup is now complete.

EPSON ECOTANK ET 4800 TROUBLESHOOT

Epson Ecotank Et 4800 Setup

Troubleshooting is the process of eliminating the hardware and software problems of your computer and your Epson Ecotank Et 4800 Setup as well. At times, your printer might trouble you with some obvious errors, such as paper jam or poor quality print. Don’t worry. It can be resolved by referring to the solutions mentioned on this page.

EPSON ECOTANK ET 4800 NOT PRINTING

If the printer is not printing properly or does not produce the expected result, refer to the solutions given below to resolve the problem.

  • Initially, make sure that the printer is turned on. Additionally, disconnect the power cord and reconnect it. Resume the printing work. Check if the printer can print properly or not.

Set the Epson Ecotank Et 4800 Setup as the default one:

  • On your Windows computer, go to Control Panel. From there, select the Hardware and Sounds option.
  • Navigate to the Devices and Printers section.
  • Locate and right-click the printer icon.
  • Select the Set as default printer option.

If the printer is not printing properly, disable the Use Printer Offline option and resume the printing work.

  • On your Windows computer, go to Control Panel.
  • Navigate to the Devices and Printers section.
  • Locate and right-click the printer icon and then select See what’s printing.
  • Go to the Printer menu and then check if the Use Printer Offline option is selected or not. If it is selected, deselect it. This should fix the problem.

EPSON ECOTANK ET 4800 WON’T CONNECT TO WIFI

In case the Epson Ecotank Et 4800 Setup is not connecting to your wireless network, just check whether the correct printer driver is installed on your computer. Ensure that the printer driver is downloaded properly.

Additionally, uninstall and reinstall the printer driver.

Print a network connection report:

  • On the printer control panel, select the Settings menu.
  • Now, select the Network Settings option and then choose Connection Check.
  • Later, select the Start button to print the network connection report.
  • Start examining the report and resolve the problem immediately.

Still not happy with the solution? 

Restart the wireless router and check if the problem is resolved or not. Additionally, disable the firewall and antivirus software on your computer as it interrupts the work.

That’s it. You’ve now seen how to resolve the “printer not connecting to the Wi-Fi network” problem.

EPSON ECOTANK ET 4800 PAPER JAM

The most common problem is paper jamming while using the Epson Ecotank Et 4800 Setup. It can be resolved completely.

If necessary, cancel the print jobs. Here’s how to do it.

  • On your Windows computer, go to the Control Panel window.
  • Select the Hardware and Sounds option.
  • Navigate to Devices and Printers.
  • Locate and right-click the printer icon and then select See what’s printing.
  • Select the Printer menu.
  • Choose Cancel All Documents. It deletes all the print jobs.
  • You need to clear all the jammed papers from the printer. Here’s how to do it.
  • At first, remove the jammed paper from the rear paper feeder.
  • Open the inner cover of the Epson Ecotank Et 4800 Setup and then lift the scanner unit.
  • If you find any jammed papers inside it, remove it immediately.
  • Lower the scanner unit and then close the inner cover of the printer.
  • If there are jammed papers inside the ADF, clear them out by referring to the steps given below.
  • Initially, open the ADF cover and then remove all the jammed papers from it.
  • Now, open the ADF input tray and then remove all the jammed papers.
  • Check if there are any jammed papers left out.
  • Close the ADF input tray and then the ADF cover.
  • Start reloading the originals and begin your printing work.

We believe that this article has assisted you with the Epson Ecotank Et 4800 Setup. In case you have doubts, you can message or call our well-trained technicians to clear all your doubts.


G
E
T
S
U
P
P
O
R
T