epson-et-4500 2020-12-09T05:36:13+00:00
  • Home »
  • Epson Et 4500 printer

EPSON ET 4500 SETUP

Epson ET 4500 is a multi-function printer, and so it can print, copy, scan, and fax. It uses the color inkjet technology for printing. This printer supports the AirPrint feature using which you can print from your iOS and Mac devices. The printer weighs around 6.3 kg, excluding the ink and the power cable.Let us now see how to perform your printer Epson ET 4500 setup. This involves the hardware setup part and the software installation. First, we shall look into the hardware setup.

Unboxing the printer:

  •   Take out all the protective materials from the outside of the printer.
  •   Lift the scanner unit. Then, remove all the protective materials from the inside of the printer.
  •   You can now lower the scanner unit.
  •   Do not forget torecycle all the protective materials.

Filling the ink tanks:

  •   Open the cover of the ink tank unit. Remove the cap from the cyan ink tank. Then, attach the same to its holder.
  •   It is now time to unpack the cyan ink bottle.
  •   Snap off the bottle tip and then take out the bottle cap. Be very careful while removing the protective seal. You can now close the bottle cap tightly.
  •   Use all the ink in the bottle to fill up the tank. You can refer to the color-coded sticker that is located above the ink tank unit for recognizing the color of each ink tank.
  •   Be extremely cautious when you seal the ink bottle.
  •   You can now replace the ink tank cap.
  •   Now, repeat the above procedure for the rest of the ink bottles.
  •   Close the cover of the ink tank unit and continue with the procedure to perform the Epson ET 4500 printer setup.
Epson Et 4500 setup

Powering on the printer:

  •   Take the power cable and connect one of its ends to the rear section of the printer.
  •   Plug the other end of this power cable into the wall socket.
  •   Refrain from connecting to your computer at this stage.
  •   Press the power button on your printer to turn it on. Once that is done, you can choose the desired language, the country, the date, and the time.
  •   You will now find a message on the LCD screen of the printer that asks you to see the setup manual. Now, press and hold the OK button for 3 seconds to continue with the steps to perform the Epson ET 4500 setup.
  •   It is now time to press one of the Start buttons on the printer. This action will begin the ink charging process. This process will usually take approximately 20 minutes. You can be sure that the ink charging is over when you see the power light stop flashing.
  •   Avoid turning off the printer, raising the scanner unit, or loading paper while the ink charging is taking place.

Loading paper into the printer:

  •   First, confirm that your printer is not charging. Flip the printer’s feeder guard in the forward position.
  •   You can now raise the paper support and allow it to tilt back slightly.
  •   Gently slide the edge guide to your left and follow the next instruction to perform the Epson ET 4500 printer setup.
  •   It is now time to load paper into the printer. So, do it with the printable side facing upwards. Make sure that you load the paper so that it rests against the right side of the rear paper feed slot.
  •   Turn your attention to the edge guide and slide the same against the paper. Then, flip the feeder guard back.
  •   Pull the output tray out of the printer. Then, you need to raise the paper stopper.
  •   You can now go ahead and choose the desired paper settings on your printer control panel.
  •   Now that you have finished loading the paper, you can continue with connecting the fax line. And then, you can start installing the printer software. When this process is over, the setup will be complete.
  •   You have now successfully performed the Epson ET 4500 setup.

Epson Et 4500 Driver Download

To perform the Epson ET 4500 driver download, follow these steps:

  •   You can either click on the Driver Download button displayed on this page or follow the steps given below to download the driver from the official printer site.
  •   On your computer, navigate to the official site of the Epson ET 4500 printer.
  •   Click the Downloads tab.
  •   From the drop-down for the Operating System field, select the desired OS. Then, click on the Go button.
  •   You will see some titles appear. Select the Drivers and Utilities Combo Package Installer option under the Recommended For You title. Click on the blue Download button beside this option.
  •   NOTE: You can also choose any other option under the Drivers title.
  •   Follow the on-screen instructions to finish the Epson ET 4500 setup driver download.

Epson Et 4500 Driver Mac

Make use of the following steps to perform the Epson ET 4500 driver download for Mac:

  •   On your computer, navigate to the official site of the Epson ET 4500 printer.
  •   Click the Downloads tab.
  •   From the drop-down for the Operating System field, choose macOS 11.x. Click on the Go button.
  •   You will see some titles appear. Select the Drivers and Utilities Combo Package Installer option under the Recommended For You title. Click on the blue Download button beside this option.
  •   Continue with the rest of the on-screen instructions to complete the Epson ET 4500 driver download for your Mac computer.

Epson Et 4500 Wireless Setup

You can configure your Epson printer to communicate with your computer by utilizing a wireless router or access point. You can connect this wireless router or access point to your computer over a wired or wireless network.

Let’s now see how to perform your Epson ET 4500 wireless setup.

If it is a wireless network, you can change your wireless network settings via your printer control panel. You can make use of the steps in the Start Here sheet if you are installing the printer on a wireless network. After you install the required software, the installer program will guide you through the network setup.

  •   On the control panel of your Epson printer, press the Up or Down arrow button and choose Wi-Fi Setup. Then, press the OK button.
  •   On the next screen, select the Wi-Fi Setup Wizard option and press OK.
  •   Choose your wireless network name and press OK to continue with the steps to complete the Epson ET 4500 wireless setup.
  •   With the help of the numeric keypad, enter your wireless password. Then, press the OK button.
  •   Confirm your network settings and press the OK button to save all of them. If you wish to change a setting, use the Back button.
  •   In case you wish to print a network setup report, press any of the Start buttons. Or else, just press the OK button.
  •   In case the network connection is successful, you will see the Wi-Fi icon in the top-right corner of your LCD screen.

Epson Et 4500 Wps Setup

If your network makes use of a WPS-enabled wireless router or access point, you can connect the Epson printer to that network using the WPS method. WPS is the acronym for Wi-Fi Protected Setup.

In case your router or access point does not have a hardware WPS button, it might have a virtual button in its software.

Let’s now discuss how to perform the Epson ET 4500 WPS setup.

  •   On the printer control panel, press the Up or Down arrow button and select the Wi-Fi Setup option. Press the OK button.
  •   A new screen will be displayed now. Press the Down arrow button. Then, choose the Push Button Setup (WPS) option and press OK.
  •   Continue with the instructions on the LCD screen to finish the WPS setup.
  •   You can now return to the Home screen by pressing the OK button again.
  •   In case the network connection is successful, you will see the Wi-Fi icon in the top-right corner of your LCD screen.
  •   You have now completed the Epson ET 4500 WPS setup.

Printer Airprint Setup

Using the AirPrint feature, you can perform instant wireless printing from your iOS devices, such as iPad, iPhone, and iPod touch. The device should have the latest version of iOS to use the AirPrint feature. You can also print wirelessly from a Mac if the latest version of OS X is installed.

To make use of Epson ET 4500 AirPrint, follow these instructions:

  •   First, load paper into the printer.
  •   Set up the printer for wireless printing.
  •   Connect your Apple device (iPad, iPhone, or iPod touch) to the same wireless network to which your printer is connected.
  •   You can now start printing from your Apple device to the printer.
  •   You have now successfully used the Epson ET 4500 AirPrint feature.
Epson Et 4500 Airprint

How to Scan on Printer

Using your Printer Epson ET 4500 setup, you can quickly scan your original photos or documents and then store them in the form of digital files.

Now, let’s see the procedure to scan on Epson ET 4500.

You can start scanning on your Epson printer using the control panel, the Epson Scan Icon, or from a scanning program. We shall discuss how to start scanning using the control panel.

  •   First, confirm that you have installed the Epson printer software and connected your printer to the computer or network.
  •   Press the Up or the Down arrow button on the printer control panel and then choose the Scan option.
  •   Press the OK button. The scan options will be displayed.
  •   Press the Up or Down arrow button to select one of the following options. Then, press the OK button.
  •   Cloud
  •   This option will send the scanned files to a destination, which you have registered with Epson Connect.
  •   Computer
  •   This option will save the scanned file as a JPEG file.
  •   Computer (WSD)
  •   This option allows you to manage network scanning on your Windows computer.
  •   If you are scanning to your computer, you have two options:
  •   In case you have connected the printer and computer using a USB cable, press the Up or Down arrow button (on the Control Panel) to choose the USB Connection option.
  •   If the printer is connected to the computer over a network, use the Up or Down arrow button to choose the computer name from the list. Then, press the OK button.
  •   Finally, press one of the Start buttons to begin the scanning.

Epson Et 4500 Troubleshoots

As with any printer, users encounter some issues while using the Epson ET 4500 printer also. Some of the common problems are given here:

  •   Problems while printing from a computer.
  •   Page layout and content issues.
  •   Print quality problems.
  •   Copying issues.
  •   Scanning problems.
  •   Paper jamming problems.
  •   Networking issues.
  •   Paper feeding problems.

Let us now look into two of the Epson ET 4500 problems and see how to troubleshoot them:

Printing of blank pages:

In case blank pages are getting printed unexpectedly, follow these steps:

  •   Confirm that you have chosen the correct paper size settings in the printing program as well as the printer software.
  •   In case a blank page exists in the document you are trying to print and you wish to skip printing the same, choose the Skip Blank Page setting in the Epson printer software.
  •   Try running a print head nozzle check. By doing this task, you can see whether any of the nozzles are clogged. If they are, then clean the print head.
  •   Confirm that your Epson printer has been selected as the default one in the printing program.
  •   Sometimes, if the ink tanks are not full, that might result in the printing of blank pages issue. So, you have to visually check your ink levels. If you refill the tanks, the issue will be resolved.
  •   You have now solved one of the Epson ET 4500 Setup problems.

Let us move to another common issue that users face with their Epson ET 4500 printers.

Appearance of white or dark lines in the printouts:

If white or dark lines appear in your prints, it is termed as “banding.” In this case, try the following procedure before reprinting:

  •   See if any of your print head nozzles are clogged. You can run a nozzle check to do this task. You can then clean the print head if required.
  •   Confirm that the paper type setting is matching the type of paper you have loaded into the printer.
  •   Ensure that you have loaded the paper’s printable side correctly. In case there are any high-speed settings on the printer software, disable them.
  •   Try aligning the print head.
  •   If none of the above steps seem to work, you might have to check the ink levels. If necessary, refill the ink.
  •   The “banding” issue might also occur if you haven’t used the printer for a prolonged period. In this case, try running the Power Ink Flushing utility.
  •   You have now solved another one of the Epson ET 4500 problems.
Appearance of white or dark lines in the printouts

Epson Printer Not Printing Black

At times, users report that their Epson printers are not printing in black. In some cases, the printer might print in color but not in black. In other instances, you might face issues while printing in color as well as in black.

Let’s now see the reasons behind your Epson ET 4500 not printing black. Following that, we shall see the solutions to solve the problem.

Reasons:

  •   Any issue with the print head
  •   A fault in the printer drivers
  •   Dried out ink cartridges or any other problem with the cartridges

Tips to resolve the issue:

  •   Remove the ink cartridges from your Printer Epson ET 4500 Setup.
  •   After checking the ink levels, decide whether or not to replace the cartridges.
  •   If you have decided to replace the ink cartridges, make sure you insert them correctly.
  •   If the problem persists, you have to check your nozzles. Clogging of nozzles is a common issue that Epson printer users face frequently. So, try cleaning the nozzles in the print head.
  •   Now, the Epson ET 4500 not printing black issue should be resolved.
epson-et-4500-not-printing-black

G
E
T
S
U
P
P
O
R
T