Epson workforce wf 110 2021-08-18T05:01:09+00:00
  • Home »
  • Epson Workforce WF 110 Printer

INSTRUCTIONS FOR WORKFORCE WF 110 SETUP

Epson Workforce WF 110 Setup

The Epson Workforce WF 110 printer supports wireless and USB connectivity, and so you can easily set it up. It hardly takes 10 – 15 minutes. So, you can check this page for a more simple and easy solution to Epson Workforce WF 110 Setup.

UNBOXING AND BASIC SETUP

Unboxing:

The initial setup procedure begins with the unpacking process. Start with unpacking the product box and check all the components present in it. Now, take all the components from the box and keep your printer aside. Remove all the protective materials from the inside and outside of your printer. Now, it’s time to turn on the printer.

Turning On The Printer:

Connect one end of the supplied power cord to the back of your Epson printer and the other end to a wall socket. Turn on the printer. You can now select the required language, date, and time on your printer control panel. The Epson Workforce WF 110 Setup offers you the most effective ink cartridge that lasts for a longer period.

Installing The Ink Cartridges:

Unpack the ink cartridge and remove all the protective tapes. Now, open the inner cover. You’ll see an ink cartridge compartment inside it. Install the ink cartridge inside it and close the inner cover of your Epson printer. Now, press the OK button on your printer control panel. The ink starts charging. It takes about three to four minutes. When the ink charging gets completed, you can now press the OK button to return to the home screen.

With the completion of cartridge installation, you can proceed to load the paper.

Loading Paper:

  • Open the front cover of your Epson Workforce WF 110 Setup.
  • Now, slide the paper guides.
  • Load the paper. Make sure that you do not overload the paper.
  • Confirm the paper settings on your control panel.

The hardware setup is now complete. The printer is not yet connected to the computer. So, to build the communication between your printer and computer. Proceed to the software installation.

Software Installation:

Since the Epson Workforce WF 110 printer comes with the CD-ROM, you can simply insert it into the CD/DVD drive of your computer. Run the software program to install the driver. When prompted, select the connection method. Alternatively, you can download the Epson Workforce WF 110 Setup driver from the official Epson website and install it on your computer.

EPSON WORKFORCE WF 110 DRIVER

Usually, printer drivers are installed for building the communication between your printer and computer. You can now download the Epson driver from the official Epson website. Otherwise, obtain the printer driver from the supplied CD-ROM. Or else, just click the Driver Download button.

EPSON WORKFORCE WF 110 DRIVER FOR WINDOWS

Downloading the printer driver for your Windows computer is easy. It is done with simple steps.

  • Using your Windows computer, open a web browser.
  • Go to the official Epson website.
  • Enter the model name in the search bar and then click Search.
  • Click Downloads. From there, choose the required OS and then click GO.
  • Scroll down to select your preferred Epson Workforce WF 110 Setup driver.
  • Click the blue Download button.

EPSON WORKFORCE WF 110 DRIVER FOR MAC

The Epson printer driver for your Mac can be downloaded with simple and easy steps. Here’s how to do it.

  • On your Windows computer, open a browser.
  • Visit the official Epson website.
  • Enter the printer model name in the search field and then click Search.
  • Now, click Downloads. Choose the required OS from the drop-down menu and then click GO.
  • Scroll down to select your preferred OS version and then click the Download button.

EPSON WORKFORCE WF 110 MANUAL DOWNLOAD

Epson provides an online user manual for additional clarifications. If you wish to download the user manual for Epson Workforce WF 110 Setup from the official website, then check the following steps.

  • Using your Windows computer, open a web browser.
  • Go to the official Epson website.
  • Enter the product name in the search field and then click Search.
  • Click the Manuals and Warranty tab.
  • Scroll down to select your preferred choice of the user guide.
  • Now, click Download.

EPSON WORKFORCE WF 110 SCAN SETUP

Since the Epson Workforce WF 110 Setup does not allow you to scan the documents, you cannot scan the documents that you want to. It is because the Epson Workforce WF 110 wireless mobile printer does not support scanning. So, you cannot perform the scan setup procedure for your printer.

EPSON WORKFORCE WF 110 SCAN TO COMPUTER

The Epson Workforce WF 110 printer does not support the scanning functionality. So, you cannot scan the documents to your computer.

EPSON WORKFORCE WF 110 MOBILE PRINTING SETUP

With Epson iPrint application, you can print from your Android mobile. The Epson Connect services include the Epson iPrint application; thus, it is mandatory to register for the Epson Connect service so that you can use the Epson iPrint application seamlessly.

On your printer control panel, press Menu and then press OK.

  • Press the arrow buttons to select Epson Connect Services and press OK.
  • Now, select Register/Delete.

It’s time for the setup procedure.

Before you begin, make sure that you’ve connected the Epson Workforce WF 110 Setup and your Android mobile to the same wireless network.

  • Now, on your Android, go to the Google Play Store.
  • From there, download and install the Epson iPrint application.
  • Now, launch the Epson iPrint application, and tap Printer is not selected. Tap here to select a printer.
  • Now, select the Local tab and then tap your Epson Workforce WF 110 printer.
  • You can also select the Manual tab and continue with the further on-screen instructions for adding the Epson printer manually to the network.
  • You can now start printing with the Epson iPrint application.

EPSON WORKFORCE WF 110 WIRELESS SETUP

The wireless setup is done with simple and easy steps. Using the WPS method, you can connect your Epson Workforce WF 110 Setup to a wireless network.

Wireless Setup Using The WPS Method:

Initially, start the router setup procedure. After, press the WPS button on your wireless router.

  • If necessary, return to the home screen on your printer control panel.
  • Navigate to WiFi Setup and then press OK.
  • Select Wi-Fi (Recommended). Now, press the arrow buttons on the LCD screen and select Push Button Setup (WPS).
  • You can now continue with the further on-screen instructions to finish the setup procedure.
Epson workforce wf 110  Wireless Setup

Now, the product will display the Wi-Fi symbol on the printer control panel.

Configuring The Printer To A Wireless Network Using The Wi-fi Setup Wizard:

You can configure the Epson Workforce WF 110 Setup to a wireless network using the printer control panel. Here’s how to do it.

  • On the printer control panel, navigate to Wi-Fi Setup and then select Wi-Fi (Recommended).
  • Now, navigate to the Wi-Fi Setup Wizard option and then press OK.
  • Start entering the network name manually on your printer control panel.
  • Next, enter the network password and then press OK.

After a few seconds, you can see a Wi-Fi status icon appearing on the LCD screen. It indicates that the wireless setup procedure is completed successfully.

Otherwise, you can also connect the printer to a wireless network using the Wi-Fi Direct mode.

Configuring the Epson Workforce WF 110 Setup to a wireless network using the Wi-Fi Direct:

  • On the LCD screen, navigate to Wi-Fi Setup and then press OK.
  • Select Wi-Fi Direct.
  • Press Android and then continue with the further on-screen instructions.
  • You can now start enabling the Wi-Fi Direct Mode on your printer control panel.
  • Connect your mobile phone to your printer’s network and start printing wirelessly; make sure that you have installed the Epson iPrint application on your mobile phone.

Afterward, check if the AP connection is enabled. The AP connection symbol is displayed on the LCD screen. If it is displayed, then you can print directly from your mobile device.

EPSON WORKFORCE WF 110 AIRPRINT SETUP

The Epson Workforce WF 110 Setup supports the AirPrint technology. With this technology, you can start printing from your iOS devices wirelessly, and you don’t need to install any specific software.

Now, you can start the AirPrint setup procedure.

  • At first, load the paper.
  • Secondly, make sure that your printer is connected to a wireless network. Meanwhile, connect iPhone or iPad to the same wireless network.
  • Return to the Apple device. From there, select the app that you want to print from. For example, you can select the Gallery app.
  • Open the app and then choose the share icon.
  • Since your printer is AirPrint enabled, you can select the Print symbol at the bottom of the screen.
  • You can now choose the number of options.
  • Finally, tap Print to start the printing process.

The AirPrint setup is now complete for Epson Workforce WF 110 Setup.

EPSON WORKFORCE WF 110 TROUBLESHOOT

Troubleshooting involves the process of eliminating any hardware or software issues of your printer as well as your computer. In this section, you can learn the troubleshooting techniques for the most common issues. Continue to read and fix your issue in no time.

EPSON WORKFORCE WF 110 NOT PRINTING

If your Epson Workforce WF 110 printer is not printing, refer to the steps given below to troubleshoot the problem.

Performing the basic troubleshooting:

Initially, check whether the printer is turned on. If it is turned off, you can disconnect the power cord and reconnect it again. Next, you can set the Epson Workforce WF 110 Setup as the default one. It might fix the problem.

Setting the Epson printer as the default one:

  • On your Windows computer, go to Control Panel.
  • Select Hardware and Sounds and then choose the Devices and Printers option.
  • You can now locate and right-click the printer icon in that section.
  • Select Set as default printer.
  • You can also cancel all the print jobs. It mostly resolves the problem with your printing.

Canceling the print jobs:

  • On your Windows computer, go to Control Panel.
  • Select Hardware and Sounds and then choose Devices and Printers.
  • Select See what’s printing. Now, select the Printer menu at the top left corner.
  • Select Cancel All Documents. This should fix the problem.

Additional Solution

  • You can check the printer connection port.
  • Check whether the Epson Workforce WF 110 Setup is not in offline status. If it is selected, you can deselect it.
  • Uninstall and reinstall the printer driver.
  • Make sure that the paper settings are correct.

EPSON WORKFORCE WF 110 WON’T CONNECT TO WIFI

Sometimes, the printer might not connect to the Wi-Fi connection, thus making you feel upset. So, it is best to troubleshoot it immediately.

Epson workforce wf 110 Offline

At first, check whether you have a stable Internet connection. If not, make sure that you restart the router setup procedure.

You can print a network connection report and check the problem of the Epson Workforce WF 110 Setup. Here’s how to do it.

Printing the Network Connection Report:

  • On your printer control panel, select Menu and then press OK.
  • Navigate to Network Settings and then select Connection Check.
  • Finally, press OK. The Network Connection Report prints.
  • Now, start checking the error codes and troubleshoot the problem.

EPSON WORKFORCE WF 110 PAPER JAM

If the printer is troubling you with the paper jam issue, you can check the steps given below.

Clearing the paper jam issue:

Open the inner cover of your printer. You’ll find the jammed papers. Remove the jammed papers.

Lastly, close the inner cover of your printer.

If the paper jam is in the rear paper feed, remove the jammed papers from Epson Workforce WF 110 Setup.


G
E
T
S
U
P
P
O
R
T