Epson Workforce Wf 7210dtw 2021-08-19T05:14:21+00:00
  • Home »
  • Epson Workforce WF 7210DTW Printer

INSTRUCTIONS FOR Epson Workforce WF 7210DTW SETUP

The Epson Workforce WF 7210DTW Setup procedure isn’t difficult. It hardly takes 10-15 minutes. With all of the improvised features in the printer, you can easily complete the setup procedure.

Epson Workforce WF 7210DTW Setup

UNBOXING AND BASIC SETUP

  • To begin with, perform the unpacking process. Open the product box. Take out the packaging materials present inside the box. Keep the printer aside. At the same time, check all the components.
  • Now, remove all the protective materials from the inside and outside of your printer.
  • Next, connect the power cord that came with the package.

Connecting The Power Cord:

  • With the supplied power cord, plug the printer into an electrical outlet.
  • Press the Power button. The Epson Workforce WF 7210DTW Setup turns on immediately.
  • On the printer control panel, select the language, date, and time.
  • Proceed to the cartridge installation.

Installation Of The Cartridge:

Open the top cover of the printer and then the cartridge cover.

Unwrap the new ink cartridge and remove all the protective yellow tapes from it. Insert all the four ink cartridges into the cartridge holders. Ensure that each cartridge fits firmly into the place. Now, close the ink cartridge cover and then the top cover.

Start the ink charging process. When it is over, you can load the paper.

Paper loading:

  • Pull out the paper cassette.
  • Adjust the paper guides.
  • Load the paper. Place the paper cassette into the Epson Workforce WF 7210DTW Setup.
  • On the Epson printer control panel, set the paper settings as per your choice.

The hardware setup is now complete. Proceed to the software installation.

Software installation:

  • Since the printer comes with the software disc, insert it into the CD/DVD of your computer.
  • Locate and double-click the CD-ROM icon to begin the installation.
  • You can now complete the on-screen instructions to finish the setup procedure.
  • When asked, select the connection method of your choice.
  • In case you do not have the installation CD, download the software from the official Epson website and install it.
  • Continue to run the software to finish the Epson Workforce WF 7210DTW Setup procedure.

EPSON WORKFORCE WF 7210DTW DRIVER

The Epson Workforce WF 7210DTW printer driver is obtained either from the software disc or by downloading it from the official Epson website. Basically, it builds communication between the printer and computer. Using the printer driver, connect the printer and computer through your preferred choice of connection.

EPSON WORKFORCE WF 7210DTW DRIVER FOR WINDOWS

You can refer to the steps given below to download the printer driver for your Windows computer.

  • Using your Windows computer, open a web browser.
  • Go to the official Epson website. Click the Support tab.
  • Enter the Epson model name in the search bar and then click Search.
  • Select the Drivers & software option.
  • Click Download next to the preferred Epson Workforce WF 7210DTW Setup driver.

EPSON WORKFORCE WF 7210DTW DRIVER FOR MAC

You can refer to the simple steps given below to download the printer driver for your Mac.

  • Using your Windows computer, open a web browser.
  • Visit the official Epson website and click the Support tab.
  • Type the Epson model name in the search field and then click Search.
  • Select the Driver & software option.
  • Lastly, click Download next to the printer driver’s name.

EPSON WORKFORCE WF 7210DTW MANUAL DOWNLOAD

An online user manual provided by Epson is used for clearing doubts whenever you get stuck while performing a printer task. Here’s how to download the printer manual.

  • Initially, open a web browser using your Windows computer.
  • Navigate to the official Epson website and then click the Support tab.
  • Type Epson Workforce WF 7210DTW Setup in the search field and then click Search.
  • Select the Manuals & Documentation option.
  • Finally, click the Download button.

EPSON WORKFORCE WF 7210DTW SCAN SETUP

Since the printer does not support the scanning feature, you cannot perform the scan setup procedure.

EPSON WORKFORCE WF 7210DTW SCAN TO COMPUTER

The Epson Workforce WF 7210DTW printer does not support the scanning function, and there is no possibility to perform such a function. So, you cannot scan the documents and send them to your computer.

EPSON WORKFORCE WF 7210DTW MOBILE PRINTING SETUP

The Epson Workforce WF 7210DTW printer supports mobile printing, and it is easy to set up. Refer to the steps given below to complete the mobile printing setup.

  • To begin with, make sure that your Epson Workforce WF 7210DTW Setup and your device are connected to the same wireless network.
  • Download the mobile printing app from Google Play Store and install it.
  • Now, open the Epson iPrint application.
  • Choose this option: Printer is not selected. Tap here to select a printer.
  • Now, choose the Local tab and then select your printer.
  • You can now start the printing operation.

EPSON WORKFORCE WF 7210DTW WIRELESS SETUP

The wireless setup can be done with simple and easy steps. Here’s how to do it.

Epson Workforce WF 7210DTW Wireless Setup

Wireless Setup Using The Printer Control Panel:

  • On your printer control panel, go to the Home screen.
  • From there, select Wi-Fi and then choose Wi-Fi Setup Wizard.
  • Now, select the Network name from the Epson Workforce WF 7210DTW Setup control panel.
  • Next, enter the password.
  • Press OK to confirm the settings.

You can also establish the wireless connection by the WPS method. Refer to the steps given below.

  • On the printer control panel, go to the Home screen.
  • Select Wi-Fi and then choose Push Button Setup (WPS).
  • Return to the wireless router and then press the WPS button located at the back.
  • On your printer control panel, press OK.
  • If you wish to establish the wireless connection using the PIN Code setup, refer to the steps given below.
  • On your printer control panel, select Wi-Fi and then choose PIN Code Setup (WPS).
  • An eight-digit PIN is displayed on the Epson Workforce WF 7210DTW Setup control panel. Continue to perform the on-screen instructions displayed on the LCD screen.
  • When you are prompted by the device (you are currently using) to enter the eight-digit PIN, do it.
  • Finish the instructions on the LCD screen until the wireless connection is established.

The wireless setup is now complete.

EPSON WORKFORCE WF 7210DTW AIRPRINT SETUP

The AirPrint technology enables you to print wirelessly from your iPhone and iPad with the latest iOS version and from your Mac device with the latest version of macOS.

To begin with, load the paper into your printer. Ensure that your printer is set up for wireless printing.

  • Now, you can connect your device to the same wireless network that your Epson Workforce WF 7210DTW Setup is connected to.
  • On your iPhone, open the application you want to print from.
  • Scroll down and then tap the Print option.
  • Tap Select Printer and then choose your AirPrint-enabled printer.
  • You can now choose the number of copies.
  • You’re now ready to print directly from your iPhone. So, tap the Print button on your iPhone.

EPSON WORKFORCE WF 7210DTW TROUBLESHOOT

The Epson Workforce WF 7210DTW printer makes the best choice for printing your documents, but it troubles you with the most obvious errors at times. However, they can be resolved with the easiest solutions. Mostly, troubleshooting involves the process of eliminating the hardware and software issues of your Epson Workforce WF 7210DTW Setup and computer.

Epson Workforce WF 7210DTW Troubleshotting

EPSON WORKFORCE WF 7210DTW NOT PRINTING

If the printer is not printing, refer to the steps given below. It might help you resolve the problem.

  • Initially, set the printer as the default printer.
  • On your Windows computer, go to Control Panel.
  • Select the Hardware and Sounds option and then choose Devices and Printers.
  • Locate and right-click the printer icon. Select Set as default printer.

Deleting The Print Jobs:

By deleting the print jobs, you can resolve the ‘not printing’ problem.

  • On your Windows computer, go to Control Panel.
  • Select Hardware and Sounds and then choose Devices and Printers.
  • In the Devices and Printers section, locate and right-click the printer icon.
  • Select See what’s printing in Epson Workforce WF 7210DTW Setup.
  • Select the Printer menu at the top-left corner.
  • Choose Cancel All Documents. This should resolve the problem.

Additional Solution:

Check whether the printer is turned on. Ensure that the power cord is securely connected at both ends. Make sure that the correct paper size and printer driver settings are set perfectly.

EPSON WORKFORCE WF 7210DTW WON ‘ T CONNECT TO WIFI

If the printer is not connecting to Wi-Fi, refer to the steps given below. The steps might help you resolve the problem.

Initially, check whether you have an active Internet connection. Check whether the router setup procedure is properly performed. If it does not work properly, redo the router setup to connect it with Epson Workforce WF 7210DTW Setup.

EPSON WORKFORCE WF 7210DTW PAPER JAM

Sometimes, jammed papers might trouble you while performing an important task. Refer to the steps given below to resolve the paper jam issue.

  • Initially, open the front cover.
  • You’ll find some of the jammed papers inside it. So, remove them.
  • Now, pull out the paper cassette from the printer and then remove the jammed papers from the paper cassette.
  • Replace the paper cassette into the printer.
  • Lastly, close the front cover.
  • Now, open the rear cover 1 of your printer. Remove the jammed paper.
  • Next, pull out the rear cover 2 and remove the jammed papers from the Epson Workforce WF 7210DTW Setup.
  • Close the rear cover 1 and rear cover 2.

G
E
T
S
U
P
P
O
R
T